|
Post by ankorite on Sept 27, 2007 12:15:52 GMT -9
I recently was having problems with my monochrome etrex legend. My click stick was only working half of the time and the screen would get go blank sometimes while it was powered on. Also my rubber band was becoming loose and the old contact cement was getting all over the place. I found some information on the internet that detailed how to dismantle the etrex vista C and fix the same problem. It took about an hour and now it is working like new! Plus the device is still waterproof. If anyone has the same problem I am more than willing to help out (the contact cleaner only came in a big can and I only needed a few drops).
Ank
|
|
|
Post by Cozimoto on Sept 28, 2007 5:57:38 GMT -9
The waterproof band on my eTrex Legend CX was coming loose and I used Gorilla Glue to secure it back in place. It worked pretty well for any others of you suffering from that know Garmin issue.
|
|
|
Post by omgcrew on Sept 28, 2007 8:08:16 GMT -9
I had that issue too. But I ran it over with the truck and a new GPS showed up later.
|
|